Hardware
Wireless electronics that generates up to 4 channels of alternating signal of up to 150V and 800Hz configurable through the microcontroller, I2C control of the switching circuits and with GPIO of the optotriacs.
Firmware
Logic for receiving data from the cell phone to control the pixels of the matrix and configuration of the excitation circuits for its ignition by controlling the I2C port with the requested parameters.
Software
APP on Android system that allows to check the proper functioning of the hardware and the configuration of the pixel ignition. Communicates wirelessly.
DO YOU WANT TO TELL US ABOUT YOUR PROJECT?
PROJECT DETAILS
Technical Specifications
| Hardware | Blautic C1 Mux Plataform See |
| Power supply | Internal rechargeable Lithium polymer rechargeable battery |
| ON/OFF switch | |
| Operating status indicator lights | |
| Communications | Wireless communications |
| Inputs/Outputs | I2C control |
| Matrix control by means of OptoTriacs control GPIOs | |
| Tamaño: | Outside dimensions: 50 x 77 mm (W x L) |
| Smartphone/Tablet requirements: |
| Minimum screen dimensions: 5.5″ |
| Android 4.3 or higher |
| Bluetooth 4.0 or higher |
